Pillow packing machine manufacturer product technical parameters

Pillow packing machine manufacturer product technical parameters:When the pillow packaging machine seal does not appear to seal the situation, this may be the pillow packaging machine speed is too fast, needless to say this time the solution is to reduce the pillow packaging machine speed. Products become more and more popular, and performance improvement and the development of science and technology are inseparable, it's common products, has been applied in many industries, and there are many in wenzhou manufacturing its products manufacturers, the price also is different for process such as reason, not at liberty to choose when buying products manufacturers, should compare, can choose to suit their own products.


What is the cause of pillow-type packaging machine failure and the solution?

1. When the pillow packing machine product seal appeared the situation of wrinkling, this is because the pillow packing machine operating temperature is too high, and the speed is too slow to cause; The solution is to adjust the temperature to the appropriate range, which is to increase the speed of the pillow packaging machine.

2. When the cutting knife of pillow packaging machine is cut on the product, it indicates that the height of the knife holder of pillow packaging machine is not the appropriate height, and the packaging speed is too fast, the push rod and the cutting knife are not carried out at the same time, the solution at this time is to adjust the packaging speed of pillow packaging machine and adjust the height of the knife holder.

3. When the cutting position of the pillow packaging machine deviates from the color mark, it is proved that the color mark of the film is too light and the film drives to slip. At this point, the solution is to adjust its sensitivity; Switch the tracking mode of pillow packing machine to “ Tracking cutting & throughout; .

4. When the temperature meter of pillow-type packaging machine cannot control the temperature, this is the damage of the solid-state breaker, and may be the temperature control meter is broken, the solution is to replace the temperature control meter, replace the solid-state breaker.

Tips: pillow packaging machine product price due to the manufacturer's process and other reasons are different, in order to consider their own interests, when buying must not be greedy cheap choose a low price, but should be on the spot, to choose a suitable for their own.